07377 405519WhatsApp
Based in Moreton, Wirral
McGuinness Joinery
Twin-tier bench run fixed along a wall, upper tier on chrome legs above a lower worktop

Fitted benching, worktops and workstations

Benching is the job we are asked for most. Training rooms and classrooms that need a run of worktop down two walls with a raised tier behind it, offices that need workstation runs under the windows, and rooms where the bench has to take sockets and data without the cables being on show.

07377 405519WhatsApp

Covering the whole of the Wirral, Liverpool and Merseyside, and commercial work across the North West, roughly an hour and a half from Liverpool.

Thanks, that has come through. We will come back to you shortly. If it is urgent, call 07377 405519.

Get a quote

A few questions, photographs or drawings if you have them, and a written price after a look at the job.

Photographs help on a domestic job. On a commercial one the drawings are the quickest way to a real price. PDFs are fine.

Your enquiry goes straight to McGuinness Joinery. Send photos or drawings and we'll come back to you with the next step.

  • Free written quotes
  • Domestic and commercial
  • Wirral, Liverpool and the North West
  • Real photos of our own work

01How we do it

The runs are made to the room rather than bought in lengths and cut on site, so a wall that is out by twenty millimetres over six metres does not end up as a gap at one end. Joints are set where they are least seen and pulled tight, and the whole run is levelled across its length rather than levelled panel by panel.

Bench run fitted under a window, worked around the existing dado trunking

The upper tier sits on chrome legs so the lower worktop stays clear and the run does not feel heavy in the room. Where power and data come up through the bench we cut and fit the grommets rather than leaving a hole for somebody else to cover.

Training room with twin-tier benching run along two walls and under the windows

We fit to existing trunking and skirting as found. In most of the rooms we work in the sockets are already in the dado and the bench has to work around them, not the other way round.

Freestanding twin-tier island bench on a chrome leg frame

02What is included

Fitted Benching, Worktops and Workstations, in detail.

  • Twin-tier benching, single runs and freestanding island benches
  • Quartz-effect, laminate and solid-grade worktops
  • Cut and fitted to the room, levelled across the whole run
  • Grommets and cable routes cut and finished, not left open
  • Fitted around existing dado trunking, sockets and window boards
  • Chrome or painted steel leg frames

03Our work

Photographs of this work, all our own.

Twin-tier bench run fixed along a wall, upper tier on chrome legs above a lower worktop
A twin-tier bench run fixed along the wall, the upper tier carried on chrome legs over the lower worktop.
Bench run fitted under a window, worked around the existing dado trunking
A bench run fitted under the window and worked around the dado trunking and sockets that were already there.
Training room with twin-tier benching run along two walls and under the windows
Benching run along two walls of a training room, levelled across the full length rather than panel by panel.
Freestanding twin-tier island bench on a chrome leg frame
A freestanding twin-tier island bench on a chrome leg frame, made to the room rather than cut from stock lengths.
Two freestanding island benches and a window run in a finished training room
Two island benches and a window run in the same training room, with grommets cut and finished for power and data.
The team in hi-vis clearing down after a bench installation
Clearing down at the end of a bench install. The site gets swept at the end of every day, not the end of the job.

04Questions

What people ask.

Can you match an existing bench run?
Usually. Send a photograph and a measurement of the depth and the tier height and we will tell you honestly whether it will match or only sit alongside.
Do you fit the power and data?
No. We cut and finish the grommets and leave clear routes for the electrician or the data engineer, and we work to their positions.
How long does a training room take?
A room with runs on two walls and a pair of island benches is normally two to three days on site once the materials are in. We will give you a programme with the price.

Call for a no-obligation quote

We come and look, and the written price is free and carries no obligation.

07377 405519
Call WhatsApp Get a quote